Couplings

Whether bellows, elastomer, safety, or distance, GAM has a coupling that will meet your requirements.  All GAM couplings are zero backlash and custom machined per order.

Bellows Couplings

GAM offers you a complete line of bellows couplings.  Characteristics of Bellows Couplings include:

  • Torque values from 0.44 Nm to 2,500 Nm
  • High torsional rigidity, low inertia, zero backlash and misalignment compensation
  • Can be used at temperatures up to 570°F without any limitations and maintenance free
  • Patented Press-Fit method of joining the bellow to the hubs can withstand harsh environments where glued connections cannot
  • High speeds: rotational speeds up to 25,000 RPM without additional balancing

Selection Guide:View More

BELLOWS COUPLINGS SELECTION

 


Elastomer Couplings

GAM offers you a complete line of elastomer couplings.  Characteristics of Elastomer Couplings include:

  • The use of elastomer spiders with shore hardness ratings from 72-D to 98-A permit dampening of vibration caused by system resonance
  • An affordable alternative if high stiffness is not critical
  • The involute shaped teeth of the elastomer spider and jaws are preloaded and will not loosen over time
  • Ensures zero backlash and allows for easy plug-in assembly

Selection Guide:View More

ELASTOMER COUPLING SELECTION CHART

 


Safety Couplings

GAM offers you a complete line of safety couplings.  Characteristics of Safety Couplings include:

  • High torques and single point 360° re-engagement.
  • Low inertia
  • Compensation for misalignment
  • Zero backlash
  •  High torsional stiffness
  • High temperature operation

Selection Guide:View More

SAFETY COUPLING SELECTION CHARTG


Distance Couplings

Distance couplings can span axial lengths of 20ft without the need for additional intermediate bearings.  They are precision machined to the required length and are balanced for high speeds.  Their special designs allow for simple installation which make “one person assembly” possible.  Even at these long distances, they remain zero backlash, torsionally stiff, and compensate for shaft mis-alignments to prevent premature bearing failures.  GAM offers you a complete line of distance couplings.  Characteristics of Distance Couplings include:

  • Lengths to 20ft.
  • Compensation for misalignment
  • Zero backlash
  • High torsional stiffness

Selection Guide:View More

/pub/media/assets/images/content/Distance-Coupling-Selection-Chart.JPG

Items 1-30 of 65

Page
per page
Set Descending Direction
  1. EKC- 110R Couplings Gam Enterprises
    EKC- 110R
  2. EKC-110W Couplings Gam Enterprises
    EKC-110W
  3. EKC-110Y Couplings Gam Enterprises
    EKC-110Y
  4. EKC-25R Couplings Gam Enterprises
    EKC-25R
  5. EKC-25W Couplings Gam Enterprises
    EKC-25W
  6. EKC-25Y Couplings Gam Enterprises
    EKC-25Y
  7. EKC-35R Couplings Gam Enterprises
    EKC-35R
  8. EKC-35W Couplings Gam Enterprises
    EKC-35W
  9. EKC-35Y Couplings Gam Enterprises
    EKC-35Y
  10. EKC-5R Couplings Gam Enterprises
    EKC-5R
  11. EKC-5W Couplings Gam Enterprises
    EKC-5W
  12. EKC-5Y Couplings Gam Enterprises
    EKC-5Y
  13. EKC-80R Couplings Gam Enterprises
    EKC-80R
  14. EKC-80W Couplings Gam Enterprises
    EKC-80W
  15. EKC-80Y Couplings Gam Enterprises
    EKC-80Y
  16. EKM-1000 Couplings Gam Enterprises
    EKM-1000
  17. EKM-15 Couplings Gam Enterprises
    EKM-15
  18. EKM-150 Couplings Gam Enterprises
    EKM-150
  19. EKM-20 Couplings Gam Enterprises
    EKM-20
  20. EKM-200 Couplings Gam Enterprises
    EKM-200
  21. EKM-2000 Couplings Gam Enterprises
    EKM-2000
  22. EKM-30 Couplings Gam Enterprises
    EKM-30
  23. EKM-300 Couplings Gam Enterprises
    EKM-300
  24. EKM-400 Couplings Gam Enterprises
    EKM-400
  25. EKM-45 Couplings Gam Enterprises
    EKM-45
  26. EKM-500 Couplings Gam Enterprises
    EKM-500
  27. EKM-60 Couplings Gam Enterprises
    EKM-60
  28. EKM-700 Couplings Gam Enterprises
    EKM-700
  29. EKM-8 Couplings Gam Enterprises
    EKM-8
  30. EKM-90 Couplings Gam Enterprises
    EKM-90

Items 1-30 of 65

Page
per page
Set Descending Direction